3D Basic Parameters

Printing size: 300300400 mm

Layer height: 0.05~0.4 mm (Low: 0.25mm – Normal: 0.2mm – Fine: 0.1mm)

Nozzle size: 0.4 mm

Printing precision: ±0.1 mm

Print speed: <200 mm/s  – suggest: 50 mm/s

Printing material:1.75 mm PLA, ABS, Wood and so on

Support format: STL – obj – gcode (.gco)

System: Linux – Windows – OSX

Heatplate: PLA: 40-60 degrees


cura install:
other – Prusa Mendel i3
Tools: Print all at once
File-Machine Settings: 300 300 400 height
Heated Bed check
Change Machine Name CR-10 – ok

Basic
–Quality
Layer height: 0.15mm
Shell Thickness: 1.2mm (0.8 – 2mm)
enable retraction: yes
–Fill
Bottom top thickness: 1.2mm
Fill density: 20% (solid: 100% – empty: 0% – normally 20 is enough) – how strong
— Speed and Temperature
Print speed: 50 mm (- 80mm)
Printing temperature: PLA: 200 C (190-220)
Bed termperature: 40C 45C 50C
— Support
Everywhere (none – touching build plate)
Raft (None – brim)
— Filament
1.75mm
Flow 100

Advanced
Nozzle 0.4 mm (0.2 – 1mm) smaller is finer and slower – more clogging
— Retraction
Speed: 70mm (80)
Distance: 8mm (10)
— Quality
Initial layer: 0.3mm
Initial line width: 100
Cut off bottom: 0.0
Dual overlap: 0.15mm
— Speed
Travel speed: 70 mm/s
Bottom layer speed: 25 mm/s
Infill speed: 0.0mm/s (0 = printing speed) reduce time but less quality
Outer Shell speed: 30mm/s (0 = printing speed)
Inner Shell speed: 0.0mm/s (0 = printing speed)
–Cool
Minimal layer time: 5 sec
enable cooling fan: YES